Connecting The Refrigerator To Ac Voltage - Dometic CRX 1065D Instrucciones De Montaje Y De Uso

Installing and connecting the refrigerator
7.6

Connecting the refrigerator to AC voltage

D
DANGER! Electrocution hazard
• Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
• If you are operating your refrigerator on board a boat with an
AC mains connection using a shore connection, you must install a
residual current circuit breaker between the AC mains supply and
the refrigerator.
Seek advice from a trained technician.
Connecting the ACDC version to AC voltage
Proceed as follows when you connect the refrigerator to the AC supply:
➤ Plug the connector into the AC socket (fig. 9 1, page 6).
Connecting the DC version to AC voltage
You can connect the refrigerator to 100 – 240 Vw AC power if you use the MPS35
rectifier (accessory).
The MPS35 rectifier features a priority circuit which conserves the battery
connected. When a AC mains connection is used, the rectifier automatically
switches from battery to mains operation.
When disconnected from the AC supply, the rectifier automatically switches back to
battery operation. Mains operation via the rectifier always takes priority over battery
operation.
In mains operation the output voltage of the rectifier will always be 24 V. When the
rectifier is in 12 V or 24 V battery operation, the input voltage will be passed through
so that the output voltage equals the input voltage.
Proceed as follows when you connect the refrigerator to the AC supply:
➤ Attach the rectifier on the back of the refrigerator.
➤ Connect the rectifier as shown (fig. 0, page 7).
➤ Connect the refrigerator to the rectifier (fig. 0 2, page 7):
– Red cable: positive battery terminal
– Black cable: negative battery terminal
➤ Plug the connector into the AC socket (fig. 0 1, page 7).
20
CRX
EN