CRX
7
Installing and connecting the
refrigerator
7.1
Safety instructions for installation on boats
Please note the following instructions for installation on boats:
D
DANGER! Electrocution hazard
If the appliance is powered by the mains, ensure that the voltage supply
has a residual current circuit breaker.
A
NOTICE! Damage hazard
• The refrigerator is designed for short-term heeling of up to 30°.
When setting up the refrigerator, note that it must be fastened to take
account of this. If you have any questions regarding installation, con-
sult your specialist dealer.
• The appliance is designed for ambient temperatures between
+16 °C and +43 °C.
7.2
Notes on installing the refrigerator
!
WARNING! Fire hazard!
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
Observe the following when installing the refrigerator:
• Install the refrigerator so that the warm air produced can easily flow away
(either upwards or to the sides, fig. 3, page 4).
Key to fig. 3, page 4
No.
Explanation
1
Cold intake air
2
Hot waste air
3
Condenser
4
Spacing above the refrigerator if there is not sufficient air to circulate
above or at the side.
EN
Installing and connecting the refrigerator
17