SKYLOTEC SPEED Instrucciones De Uso página 134

by the manufacturer, or authorized SKYLOTEC service agent,
periodic checks may only be carried out by technical experts,
with the manufacturer's instructions precisely followed. Let any
equipment that becomes wet, dry naturally, and do not directly
expose it to the effects of heat...
6.1) Hand wash up. 40° C (104 degrees F).
6.2) Dry and store at room temperature.
6.3) Store dry and protected from light.
6.4) Do not tumble dry or wash, do not bleach.
6.5) Do not contact with harsh substances.
6.6) Mark only on labels or with permanent marker (Edding 3000)
and make a note in the log book.
Please contact the manufacturer if you have any doubt. If any faults
are picked up during inspection, the product must be replaced.
10