Dometic FRESHWELL FW 3000 Instrucciones De Uso página 21

FreshWell3000
➤ Press the SET button to transmit the value to the under-bench air conditioner.
✓ The switch-on time is set on the under-bench air conditioner.
The under-bench air conditioner is switched on with the selected air
conditioning mode at the specified time.
➤ Switch the under-bench air conditioner to stand-by.
Setting the switch-off time
I
NOTE
The under-bench air conditioner must be switched on.
➤ Press the
button twice.
✓ The OFF symbol (
➤ Use the + or – button to set the time when the under-bench air conditioner is to
switch off.
➤ Press the SET button to transmit the value to the under-bench air conditioner.
✓ The switch-off time is set on the under-bench air conditioner.
The under-bench air conditioner runs in the selected air conditioning mode until
the specified time.
Setting the switch-on and switch-off times
➤ Press the
button three times.
✓ The ON symbol (
The OFF symbol (
➤ Use the + or – button to set the time when the under-bench air conditioner is to
switch on.
➤ Press the
button again.
✓ The OFF symbol (
➤ Use the + or – button to set the time when the under-bench air conditioner is to
switch off.
➤ Press the SET button to transmit the value to the under-bench air conditioner.
✓ The switch-on and switch-off times are set on the under-bench air conditioner.
The under-bench air conditioner starts in the selected air conditioning mode at
the specified time and runs until the second specified time.
➤ Switch the under-bench air conditioner to stand-by.
EN
Operating the under-bench air conditioner
) flashes on the display of the remote control.
) flashes on the display of the remote control.
) is displayed.
) flashes on the display of the remote control.
21