Activating The Sleep Function; Replacing The Remote Control Batteries - Dometic FRESHWELL FW 3000 Instrucciones De Uso

Operating the under-bench air conditioner
Cancelling timer settings
If you have set the timer, you can cancel these settings as follows:
➤ Press the
button four times.
✓ The timer symbol disappears.
✓ The setting has been cancelled.
8.9

Activating the Sleep function

I
NOTE
The sleep function is deactivated in "Circulating air" (
"Dehumidifying" ( ) modes.
When the sleep function is activated, the set temperature is modified by 1 °C after
one hour and by 2 °C after two hours to ensure a pleasant temperature for sleeping.
➤ Set the required temperature (see chapter "Setting the temperature" on
page 19).
➤ Press the
button.
✓ The
symbol appears in the display.
The sleep function is activated.
➤ To deactivate the sleep function press the
I
NOTE
The sleep function is deactivated if the MODE button is pressed.
8.10

Replacing the remote control batteries

Replace the batteries if you see the
The battery compartment is on the back of the remote control.
➤ Gently push down the lid of the battery compartment and slide it open in the
direction of the arrow.
➤ Insert the new batteries (2x type AAA) in the remote control as indicated in the
battery compartment.
➤ Close the cover of the battery compartment.
22
button again.
symbol on the display.
FreshWell3000
) and the
EN