Air Conditioning Modes - Dometic FRESHWELL FW 3000 Instrucciones De Uso

Technical description
No. Explanation
10 SET button:
Confirms and saves settings.
11
button:
No function assigned yet
12 + button:
Increases the value
13 – button:
Reduces the value
14
Symbol
Is displayed when the batteries in the remote control are empty. If this happens,
replace the batteries, see chapter "Replacing the remote control batteries" on
page 22.
15
Symbol (transmitting values)
Is displayed briefly when the remote control is transmitting values to the under-
bench air conditioner.
6.4

Air conditioning modes

The under-bench air conditioner has the following air conditioning modes:
Air conditioning
mode
Automatic
Cooling
Heating
14
(batteries empty)
Display
Explanation
message
In this mode the air conditioner sets the temperature
(set point) automatically and manages the compressor,
heat pump and fan speed by comparing the set point
with the room temperature and it sets the
corresponding conditioning mode (see following
table).
The
You specify the temperature and blower settings, and
the air conditioner cools the interior to this tempera-
ture.
You specify the temperature and blower settings, and
the air conditioner heats the interior to this tempera-
ture.
, + and – buttons are deactivated in this mode.
FreshWell3000
EN