Bresser NATIONAL GEOGRAPHIC PIONEER 1 Instrucciones De Uso página 29

Capture photos
After you turn on the camera press the capture photo button [
switch directly to the Photo capture mode. Press the button again to take a
photo. You can also press the [
[ ] or [ ] to select different frames for your photos.
Capture videos or photos quickly
Press the capture video button [
quickly capture a video or photo.
Playback mode
The playback mode allows you to watch your videos or photos directly on the
camera's lcd screen. When you are in playback mode, press the arrow keys [
[ ] to switch between recordings. Press the [
also connect your camera to the computer with the USB cable to play the videos
and photos on your computer or you can use the Micro SD memory card with a card
reader on your computer. Your recordings are located on the removable disk in the
folder (e.g.: "H:\DCIM\100MEDIA").
Delete videos/photos
A specific video or photo can be deleted in Playback mode.
To do this, find a video or photo in playback mode that you want to delete and press
the or button. Press [
only one video or photo or all the files on the memory card and press [
now be asked if the operation should be performed. Select "yes" and press the [
button to confirm.
Turn off the camera
Hold the power button [
OFF/ON] cover on the side of the camera and turn the battery master switch from
the ON ( I ) position to the OFF ( O ) position. After a while, the camera automatically
turns off the screen when in idle mode to save power and then after a while the
camera itself.
] button instead. Press the arrow keys
] or the capture photo button [
] to select delete. Now choose if you want to delete
] for 3 seconds to turn off the camera. Open the [USB
] to
] button to play videos. You can
EN
] two times to
] or
]. You will
]
29