Getting Started - Bresser TemeoTrend P Instrucciones De Uso

GETTING STARTED

1. Remove the battery compartment cover of the main unit
(Fig. 1, 18) and the transmitter (Fig. 2, 23).
2. Insert 2 new AA size batteries into each battery
compartment of the main unit (Fig. 1, 19) and transmitter
(Fig. 2, 24) according to the polarity mark in the battery
compartment.
Hinweis: When the LCD becomes dim, replace batteries
of the main unit at once. While the low battery indicator
displays in the outdoor window, it indicates low battery
capacity of the transmitter. Replace batteries of the
transmitter at once. This weather station can also be used
with external power supply* (DC 4.5V).
This device cannot be operated simultaneously
with batteries and a power adapter. This could lead to
irreparable damage to the device; the manufacturer is
24
not liable for this damage. The manufacturer is not liable
for voltage damage due to the use of an improper power
adapter.
3. Replace the battery compartment cover of the main unit
(Fig. 1, 18).
4. After the batteries are inserted, all LCD segment will
be shown.
5. Press the RESET button of main unit (Fig. 1, 13) first,
then press the RESET key of the outdoor sensor (Fig. 2,
25).
6. It will automatically receive RC signal from transmitter
for channel test within 8 seconds.
7. The RC signal will be received by the station after
approximately 5 minutes.
8. The current time & date will be synchronized
automatically via the DCF 77 signal from Germany or MSF
signal from the UK.