General Installation; Load Cell Port - Baxtran BR 40 Manual De Usuario

1. INTRODUCTION
BR40 weighing indicator is an accurate, versatil and fast indicator with check weighing functions.
The large screen of liquid cristal type (LCD) allows on easy ti read view. The LCD's are supplied with a LED backlight.
All units include automatic zero tracking, audible alarm for pre-set weights, and an accumulation facility that allows the individual weights to
be stored and recalled as accumulated total.
2. SPECIFICATIONS
Operating temperature
Load cell drive voltage
3. INSTALLATION

3.1 GENERAL INSTALLATION

• The BR40 should be placed in a location that will not degrade the accuracy.
• Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents.
• Avoid unsuitable tables. The tables or floor must be rigid and not vibrate. Do not place near vibrating machinery.
• Avoid unstable power sources. Do not use near large users of electricity such as welding equipment or large motors.
• Avoid high humidity that might cause condensation. Avoid direct contact with water. Do not use spray or immerse the indicator in water.
• Keep the indicator clean.

3.2 LOAD CELL PORT

Model BR40
Resolucion 1:6.000
Interface Salida RS232 opcional
Stabilisation time Habitualmente 1 segundo
-10 o C - 40
Adaptador AC externo, 12V 500mA, 230V. AC |
Power supply
batería 6V/4Ah
Calibration Externo automático
Display
Display digital LCD de 6 dígitos de 24 mm de alto
Balance housing En plástico ABS
Max 5V / 150mA
Load cells Hasta 4 células de 350 ohms
o C / 22 o F - 104 o F
USER'S MANUAL BR40
PIN 1 IN +
PIN 2 SENSE +
PIN 3 OUT +
PIN 4 OUT -
PIN 5 SENSE -
PIN 6 IN-
PIN 7 NO USADO
EN
33