Technical Characteristics - LAVAZZA LB 1102 Instrucciones De Empleo

Problem
The machine does not turn on. » Machine not connected to the
The machine remains on
stand-by.
The lights fl ash quickly.
The capsule loading arm does
not reach the locking position.
The pump is very noisy.
The machine does not brew
coff ee
The coff ee fl ows too quickly, no
cream forming for the espresso.
For problems not covered in the above table or if the suggested solutions do not solve the problems, contact
· Power supply: 22-26 V cc.
· Total power: 450 W (24 V)
· Water tank capacity: 1800 cc
· Weight: 8,7 kg
SOLUTIONS FOR COMMON PROBLEMS
Possible causes
mains.
» Insuffi cient power voltage.
» A failure has been detected.
» The used capsule drawer/drip
tray is full.
» Capsule inserted incorrectly.
» There is no water in the tank.
» The fi lter has been incorrectly
inserted.
» Capsule not inserted.
» The capsule inserted is not suit-
able.
» Operating temperature not
reached.
» Capsule loading arm lifted.
» No water in the tank.
» Filter not correctly inserted.
» An already used capsule was
introduced.
the Lavazza customer service.

TECHNICAL CHARACTERISTICS

For the technical characteristics, refer to the data plate on the machine.
Solutions
» Check the correct jack input.
» Check the power voltage level.
» Contact customer services or the service
centre.
» Empty the used capsule drawer/drip tray.
» Lift the capsule loading arm and insert the
capsule correctly.
» Refi ll with fresh drinking water and repeat
the loading of the hydraulic valve.
» Check the insertion of the Brita® fi lter and
repeat the loading of the hydraulic valve
(see the instructions provided with the
fi lter).
» Insert the capsule.
» Insert the Lavazza BLUE capsule.
» Wait until it reaches the proper tempera-
ture.
» Lower the capsule loading arm.
» Fill with fresh drinking water and repeat
the loading of the hydraulic circuit.
» Check the insertion of the Brita® fi lter and
repeat the loading of the hydraulic valve
(see the instructions provided with the
fi lter).
» Insert a new capsule.
· Materials used for the body: thermoplastic
· Dimensions: Height 36,5 cm
Width 27,5 cm
Depth 29,0 cm
2006/42 CE – 2004/104 CE – 2006 /95 CE
E N
17