Stroller Assembly - Joie Brisk Manual De Instrucciones

WARNING
WARNING Always use the crotch combination with the waist belt. It is
!
suggested that the shoulder harnesses should be used as well.
WARNING Ensure that all the locking devices are engaged before use.
!
WARNING To avoid injury ensure that your child is kept away when un-
!
folding and folding this product.
WARNING Do not let your child play with this product.
!
Adult assembly required.
!
Do not use the stroller with a child weighing more than 15kg. It will
!
cause damage to the stroller with an unfitted child.
To prevent a hazardous﹐ unstable condition, do not place more than 4.5
!
kg in the storage basket.
Never leave child unattended. Always keep child in view while in stroller.
!
Use the stroller with only one child at a time. Never place purses, shop-
!
ping bags, parcels or accessory items on the handle or hood.
Never use it along with component parts from other manufacturers.
!
Please read all the instructions in the manual before using the product.
!
Please save instruction manual for future use. Failure to follow these
warnings and instructions may result in serious injury or death.
To avoid serious injury from falling or sliding out, always use seat belt.
!
Make sure your child's body is clear from the moving parts when adjust-
!
ing the stroller.
Child may slip into leg openings and be strangled if the harness is not used.
!
Never use stroller on stairs or escalators.
!
Keep away from high temperature objects, liquids, and electronics.
!
Never allow your child stand on the stroller or sit in the stroller with head
!
toward front of stroller.
Never place the stroller on roads, slopes or dangerous area.
!
Do make sure all mechanisms are fixed before using the stroller.
!
Avoid strangulation, do not place items with a string around your child's
!
neck, suspend strings from this product, or attach strings to toys.
Do not put anything on the handle to prevent tipping.
!
Do not lift stroller whilst child is in it.
!
Do not use storage basket as a child carrier.
!
To prevent tipping, never let child climb the stroller. Always lift the child
!
in and out of the stroller.
Avoid finger entrapment, use care when folding and unfolding the stroller.
!
Be sure the stroller is fully open or folded before allowing child near the stroller.
!
11
To ensure your child's safety, please make sure all parts are assembled
!
and fastened properly before using the stroller.
Avoid strangulation, do make sure your child is clear from the hood.
!
Always engage the brakes when parking the stroller.
!
Discontinue using your stroller if it is damaged or broken.
!
Stroller to be used only at walking speed. This product is not intended
!
for use while jogging.
To avoid suffocation, remove plastic bag and packaging materials be-
!
fore using this product. The plastic bag and packaging materials should
then be kept away from babies and children.
For infant child restraints used in conjunction with a chassis, this vehicle
!
does not replace a cot or a bed. Should your child need to sleep, then it
should be placed in a suitable pram body, cot, or bed.
This product is not suitable for running or skating.
!
Pushchair designed to be used from birth shall recommend the use of
!
the most reclined position for new born babies.
The parking device must be engaged when placing and removing children.
!

Stroller Assembly

Please read all the instructions in this manual before assembling and using this product.
Open Stroller
- 1
Separate storage latch from storage mount 2
- 3
downwards with foot 2 , a click sound means the stroller is open completely.
!
Check that the stroller is completely open before continuing.
Assemble Front Wheels
Assemble front wheels to front legs. Check that wheels are securely attached by pulling on wheel assemblies.
The front wheels can be disassembled by pulling the release buttons backward.
Assemble Rear Wheels
Assemble rear wheels to rear legs 5 . Check that wheels are securely attached by pulling on wheel assemblies.
Snap the brake cable into the fixing tabs under square tubes to fix it.
Assemble Hood
Insert the hood pivots into hood mounts to assemble the hood
8
to backrest.
The completely assembled stroller is shown as
- 2
, and then lift the handle upwards 2 , push the footplate
4
6
7
, and stick the velcros to attach the rear hood
9
.
3
12