Stroller Operation - Joie Brisk Manual De Instrucciones

Stroller Operation

Adjust Backrest Angle
The Backrest has 5 angles.
! Make sure the backrest angle is set properly for use.
Recline Backrest
- 1
Squeeze the adjust button , and then adjust the backrest to a desired angle.
10
Raise Backrest
Just push to raise the backrest.
Use Buckle
Release Buckle
Press the center button to release the buckle.
11
Lock Buckle
Match the waist belt buckle with the shoulder buckle
A click sound means the buckle is locked completely.
!
To avoid serious injury from falling or sliding out, always secure your child with harness.
! Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on child's neck.
Use Shoulder & Waist Harnesses
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
- 1
13 Shoulder harness anchor A
- 2
13 Shoulder harness anchor B
- 3
13 Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
Use either shoulder harness anchor in the slots that are closest to child's shoulder height.
Use slide adjuster to change the harness length.
- 2
Press the button 15 , while pulling the waist harness to proper length
Adjust Calf Support
Raise Calf Support
To raise the calf support, just push it upwards.
Lower Calf Support
Press the adjustment buttons on both sides of the calf support
13
- 2
10
- 1 - 2
, and click into the center buckle.
12 12
- 3
12
14
- 1
15
- 3
15 .
- 1
16 , and rotate the calf support downwards.
Use Front Swivel Lock
Pull up the front swivel locks to maintain the moving direction.
Tip
It is recommended to use swivel locks on uneven surfaces.
Use Brake
To lock wheels, step the brake lever downwards.
To release wheels, just lift the brake lever upwards.
Tip
The brake must be engaged when placing and removing children.
Tip
Always apply brake when stroller is in stopped position. To ensure brake is fully engaged, gently rock
the stroller backwards and forwards before releasing the handle.
Use Hood
To open the hood, pull hood forwards and press stretchers down on both sides.
To fold the hood, pull up the stretchers on both sides
Fold Stroller
Press the folding button
- 3
20
. Lock the stroller by tucking storage latch onto the storage mount
locked completely.
Use Carry Strap
You can carry the stroller with ease by lifting the carry strap.
Accessories
Accessories may be sold separately or may not be available depending on region.
Use Rain Cover
To assemble the rain cover A
fasteners on the rain cover.
To assemble the rain cover B
fasteners on the rain cover.
! Before using the rain cover, please make sure the backrest has been adjusted to the lowest position and the
infant child restraint has been fastened.
! When using the rain cover, please always check its ventilation.
! When not in use, please check the rain cover has been cleaned and dried before folding.
! Do not fold the stroller after assembling the rain cover.
! Do not place your child into the stroller assembled with rain cover during hot weather.
- 2
16
17
18
19 - 1
and pull hood toward back.
20 - 1
and rotate the folding handle upwards
21
22
, place it over the stroller, and then attach the 4 pairs of hook and loop
23
24
25 , place it over the stroller, and then attach the 10 pairs of hook and loop
26
26
19
20 - 2
, push the stroller forward to fold
- 1
21
, then the stroller is folded and
14