Storage Of The Cleaner; Cleaning Of The Dust Barrel - Hkoenig AXO940 Manual De Usuario

1. All the day-to-day maintenance and repair jobs should be done after the power plug has been
pulled out.
2. Frequently remove the rubbish from the dust barrel, so as to avoid the failure of the cleaner.
3. Never wipe the surface of the cleaner with gasoline or oily liquid. Wipe it with water or neutral
detergent. Caution: be sure to wring out the wiping cloth dry for wiping, it is prohibited for water to
infiltrate into electrical elements of the cleaner.
4.When the cleaner is placed idle not in use, it should not be put directly in the sun or in a damp
place.
1. Upon the completion of the operation of the cleaner, turn off its power supply, and pull the
power plug out of the power socket, then step on the cord reeling button to reel in the power
cord fully. Hang the floor brush onto the floor brush hook, as is shown in Figure (6).
2. Place the cleaner in the dry indoor environment.
Remove the rubbish in the dust barrel frequently to avoid the failure of the cleaner.
1. Clean the dust barrel only after the power plug of the cleaner has been pulled out;
2. Put the dust barrel over the rubbish bin (bag), press down the releasing button of the dust
barrel, the bottom cover of the dust barrel will automatically fall down, and clear and empty
the dust barrel, as is shown in Figure (7).
Maintenance of the Cleaner

Storage of the Cleaner

Cleaning of the Dust Barrel

Figure (6)