Servicing; General Instructions; Warranty; Safety - Garant Xpent Manual De Instrucciones

6

Servicing

6.1

General Instructions

DE
The user is required once per shift to check the clamping system for externally evident damage and
defects, and to report any such to his supervisor without delay.
6.2

Warranty

The validity of the warranty requires that the product is used for its intended purpose and that the
manufacturer's specified service and maintenance are performed as listed in the instruction manual.
6.3

Safety

All maintenance, inspection and servicing work may be performed only by persons who satisfy the quali-
EN
fication levels specified by the manufacturer.
Chapter 1 General Instructions and Chapter 2 Safety must be complied with before any hazardous work
is undertaken.
6.4

Maintenance

6.4.1

Spindle

Maintenance work
Grease the spindle
FR
6.5

Inspection

No special inspections are necessary
6.6 Servicing
Perform servicing as specified in Chapter 6.7 Description of Maintenance and Servicing Work.
IT
ES
32
Maintenance intervals
50 h