Trouble shooting
• Switch unit on.
• Retry calibration, or:
• Contact the service department.
E52
The calibration weight is on the opposite side to the
calibration carried out by the manufacturer.
• Fit the User Calibration Weight correctly on the left
side of the fl ange. Repeat Calibration.
• Contact the service department.
E82
Fault during self-test at start-up.
• Switch unit off, wait for 20 seconds.
• Switch unit on.
E92
During the second attempt the gauge arm for distance
and rim diameter was still not in the home position.
Both gauge arms are rendered inoperative.
• Wait 5 seconds, or press the STOP key to continue.
E500
E501
E502
E503
E504
Laser Pointer failure
• Contact the service department.
106