Protool RGP 80-11 E Manual De Instrucciones página 21

Cutter
Installation
head
Cutter head "Flat Shape"
with 12 hard-metal cutter
wheels
FZ-RGP 80
Cutter head "Pointed
Shape" with 12 hard-metal
cutter wheels
SZ-RGP 80
Grinding
Installation
head
Diamond grinding head:
grinding wheel with 8
segments provided with
diamond grits
DIA HARD-RGP 80
Diamond grinding head:
grinding wheel with 8
segments provided with
diamond grits
DIA ABRASIVE-RGP 80
Hard-metal grinding head:
grinding wheel provided
with hard-metal grits
HW GROB-RGP 80
Diamond grinding head,
abrasive disk with soldered
diamond grains
DIA UNI-RGP 80
Hard-metal grinding head:
grinding wheel provided
with hard-metal grits
HW FEIN-RGP 80
Application
- Plaster removal
- Removing of elastic protective coats on
walls and fl ooring
- Removing of foam base and glue
remnants (carpet remnants)
- Removing of fl oor tile glue remnants
- Removing of bitumen and concrete
protective coats
- Removing of latex paints or oil paints on
gypsum surface
- Plaster removal
- Removing of bumps and excessive mate-
rial after boarding – fresh concrete work
- Removing of foam base and glue
remnants (and carpet remnants)
- Removing of fl oor tile glue remnants
- Removing of plaster made of synthetic
resin (made on thermal insulation)
Application
- Removing of bumps and excessive mate-
rial – screed fl oor cover
- Grinding and cleaning weather-worn
parts of concrete constructions
- Removing of bumps – old concrete
- Removing of bumps and excessive mate-
rial – screed fl oor cover
- Grinding and cleaning – fresh concrete
- Grinding – abrasive materials
- Removing of elastic protective coats on
walls and fl ooring
- Reduction of gypsum and cellular concrete
- Removing of impurities – concrete fl oors
- Removing of latex or oil paints – gypsum
surface
- Rough working
- Universal use, removal of paint from con-
crete, hard plasters, wood, removal of
elastic glues, hard plasters, soft concrete
- Removing of elastic protective coats on
walls and fl ooring
- Reduction of gypsum and cellular concrete
- Removing of impurities – concrete surface
- Removing of latex or oil paints on gypsum
surface
- Fine working
Electronic
adjusting
wheel
4. – 6.
4. – 6.
Electronic
adjusting
wheel
6.
6.
3. – 5.
5. – 6.
3. – 5.
21