When
illuminates, proceed as follows:
• Empty and reinsert the drip tray.
• Rinse the water reservoir thoroughly.
• Fill the water reservoir with tap water up
to the max. mark.
• Insert the water reservoir.
• Press the
button to continue with the
descaling programme (takes about 5
minutes).
When
illuminates, proceed as follows:
• Empty the drip tray and reinsert it.
When
is illuminated, the descaling
programme is fi nished.
• Insert the water fi lter if necessary
(„Water hardness and fi lter", page 18).
Other settings
Energy-saving mode
After the last action, the appliance
switches automatically (depending on the
settings) to the energy-saving mode. The
appliance is set to 5 minutes
factory.
• Switch on the appliance.
• Press the
and
simultaneously until
• Press the
button twice.
illuminates.
• Press the
button until one of the four
times is set. The time is displayed by the
beans on display 9.
22
BA_Solo_042015.indd 22
BA_Solo_042015.indd 22
• Press the
Auto-OFF function
The appliance switches off automatically
after the last action (depending on the
setting). From the factory, the appliance is
set at 30 minutes
• Switch on the appliance.
• Press the
• Press the
in the
• Press the
buttons
fl ashes.
• Press the
Display
fl ashing
button to confi rm the
setting.
.
and
buttons
simultaneously until
button three times.
illuminates.
button until one of the
four switch-off times is set. The time is
displayed by the beans on display 9.
Display
fl ashing
button to confi rm the
setting.
Time
5 minutes
(factory setting)
15 minutes
30 minutes
Off
fl ashes.
Time
30 minutes
(factory setting)
2 hours
4 hours
8 hours
20.04.2015 21:30:46
20.04.2015 21:30:46