Before Use; Operation - cecotec BAMBA Surfcare 800 Magic Waves Pro Manual De Instrucciones

ENGLISH

3. BEFORE USE

1. Take the product out of the box.
2. Remove all packaging materials. Keep the original box.
3. Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.

4. OPERATION

Note: Use on dry hair only.
Temperature settings
• 150 ºC: Damaged or dyed hair
• 170 ºC: Thin, soft hair
• 190 ºC: Medium-thickness, normal hair
• 210 ºC: Thick, strong hair
1. Wash, dry and untangle hair before curling it. Heat protection product or sprays can be
used to avoid damage to your hair.
2. Connect the device to a power supply.
3. Press the on/off button to turn the appliance on.
SURFCARE 800 MAGIC WAVES PRO
16
4. Press the temperature button to select the desired temperature. Select a suitable
temperature according to the hair conditions (150 ºC, 170 ºC, 190 ºC, 210ºC). Once
temperature is set, the light indicator will flash until this temperature is reached. The
light indicator will remain on when temperature is reached and the device will be ready
to use.
Note: This curling iron counts on memory function, therefore when turned on, it will operate
by default with the previous temperature setting used.
5. Insert a 5-cm wide by 3-cm thick section (approx.) of hair in the device's heating
cylinder as shown below.