Indications For Use; Measurement Principle; Device Description; Power Supply - Soehnle SYSTO MONITOR CONNECT 400 Instrucciones De Manejo

INTRODUCTION

Indications for Use

The Soehnle Systo Monitor Connect
EN
400 is digital monitors intended for
use in measuring blood pressure
and heartbeat rate with arm circum-
ference ranging from 22 – 42 cm /
8.66 – 16.54 inch.
It is intended for adult indoor use
only.

Measurement Principle

This product uses the Oscillometric
Measuring method to detect blood
pressure. Before every measurement,
the unit establishes a "zero pressure"
equivalent to the air pressure. Then
it starts inflating the arm cuff, mean-
while, the unit detects pressure os-
cillations generated by beat-to-beat
pulsatile, which is used to determine
the systolic and diastolic pressure,
and also pulse rate.

Device description

Please note the fold-out page.
Cuff
A
Air hose
B
LCD display
C
Pump
D
Power plug connection
E
Battery compartment
F
Memory key ( )
G
Settings key ( )
H
Start/Stop key (
I
22

Power supply

1. Battery operation:
2. Operation with optional power
Please use only the adapter approved by the
manufacturer. Available separately (Item
No. 89165/5).
Inserting and replacing
batteries
1. Open the battery compartment.
2. Insert the batteries. Note the
3. Close the battery compartment
The normal service life of new and unused bat-
teries is 300 measurements at a measurement
period of 60 seconds each.
)
4 alkaline batteries AAA 6 V DC
adapter:
6V 1A
correct polarity.
cover.