Prior To The First Measurement; Setting Date, Time, And Unit Of Measure; Selecting The User; Soehnle Connect App - Soehnle SYSTO MONITOR CONNECT 400 Instrucciones De Manejo

PRIOR TO THE FIRST MEASUREMENT

Setting date, time, and unit
of measure
EN
Date and time must be set prior to
using the blood pressure monitor so
that every measurement value that
is stored can be time stamped.
1. If the device is switched off , push
the key ( ) to display the time.
Then push and hold the key ( )
to set the year.
2. Push the key ( ) to change the
[YEAR]. Each time you push the
key, the year increases by one.
3. Once the year has been set, push
key ( ) to save the information
and continue.
4. Repeat steps 2 and 3 to set
[MONTH], [DAY], [HOUR], [MINU-
TE] and [UNIT OF MEASURE]
You can switch between the unit of measure
"kPA" (kilo pascal) or "mmHg" (millimetre
mercury column), where mmHg is the most
common unit for measuring blood pressure.
5. After setting the unit of measure,
the LCD display shows "done" and
then displays all settings entered
by you before switching off .

Selecting the user

A total of two users can be pro-
grammed. 60 datasets can be stored
for each user.
1. If the device is switched off , push
and hold the key ( ) to select the
user. The user symbol ( ) fl ashes.
2. Push key ( ) again to select be-
tween user 1, 2 or "Guest" (guest
mode).
24
The measurements are not stored or transmit-
ted in guest mode.
3. Confi rm the selection of the
respective user by pushing ( ). The
respective user and "done" are shown
before the display switches off .

Soehnle Connect app

To use all functions of your Systo
Monitor Connect 400, we recommend
that you connect the device to the
Soehnle Connect app prior to fi rst use.
1. Download and install the free
Soehnle Connect app on your
smartphone or tablet. Scan the
QR code to access the app direc-
tly. Or fi nd it in Google Play or the
App Store..
Android : min. 4.4.4 / iOS : min. 9.0 / Bluetooth
™ ®
2. Activate Bluetooth on your
smartphone or tablet and open
the Soehnle Connect app. When
opening the app for the fi rst time,
you will automatically be guided
through the process to connect a
Soehnle end device.
Once you have already used the Soehnle Connect
app, to connect in the app go to the "main menu"
and press "my devices" and then "add devices".
Compatibility
The Soehnle Connect app is com-
patible with Google Fit® and Apple
Health®.
: min. 4.0
®