Setting; Setting Menu; Selecting Language - Eiki LC-XNB2W Manual De Instrucciones

SETTING

Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select
SETTING
dialog box SETTING Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to the item that you want to set, and
then press the SELECT button to set it "On" or "Off".
When this function is in the "On" position, this projector
Blue back
will produce a blue image instead of the video noise on
the screen when the input source is unplugged or
turned off.
When this function is in the "On" position, the On-
Display
Screen Displays always appear when adjustments are
made. (The following displays disappear by switching
this function "Off.")
Preparation Display
(The Number-counting-down Display)
Mode Display
Volume/Mute Display
Zoom Display
Focus Display
Normal Display
No show Display
Keystone Display
D.Zoom Display
When this function is in the "On" position, the top /
Ceiling
bottom and the left / right reversed picture is provided
to project the image from a ceiling mounted projector.
When this function is in the "On" position, the left / right
Rear
reversed picture is provided to project the image to a
rear projection screen.
Turn this function "On" position in the SETTING menu.
Split wipe
The picture will change into next one by sliding black
image side ways like drawing the black curtains when
the input source is turned into another one.
The Lamp age function is designed to reset the lamp
Lamp age
replacement monitor timer. When replacing the lamp,
reset the lamp replacement monitor timer by using this
function. (Refer to page 34.)
The language used in the ON-SCREEN MENU is selectable from
among English, German, French, Italian, Spanish and Japanese.
Press the MENU button and the ON-SCREEN MENU will
1
appear. Press POINT LEFT/RIGHT buttons to select
LANGUAGE and press the SELECT button. Another dialog
box LANGUAGE Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to the language that you want to set,
and then press the SELECT button.

SETTING MENU

and press the SELECT button. Another

SELECTING LANGUAGE

Set the Pointer to the item,
and then press the SELECT
button.
Ceiling function
Rear function
Move the Pointer to the
language that you want
to set, and then press
the SELECT button.
GB
31