GUTMANN Amplia 5300 Instrucciones De Uso página 17

Control Panel
There are 6 symbols on the Control
Panel
Aspiration Power
The first 5 keys regulate the aspiration
power:
Symbol "0" = Stand by, "0" flashes
Symbol "0" = Off, "0" doesn't flash
Symbol "1" = Low power
Symbol "2" = Medium power
Symbol "3" = High power
Symbol„"= Intense mode lasts for 5
minutes, after which it is automatically
turned off and the previously selected
mode continues.
ON / OFF
To activate the hood, press "0" for 3
seconds: the symbol flashes and the
hood is in Stand by mode. By pressing
"0" once more, the symbol stops flash-
ing and the hood is turned off. To acti-
vate the hood, press the key relating to
the desired power level. To turn it off,
press the illuminated key once more.
The intense mode if automatically
turned off after 3 minutes, and the high
mode continues (level 3).
Pressing the power level keys, the envi-
ronment lighting function is activated.
Note: By turning of the hood, the flap
fan (4) is automatically turned off. Cau-
tion: never expose body parts near the
hood during operation.
Lighting
Pressing the key with the lighting sym-
bol, the lighting function is activated. If
you press it one more time, the lights
are turned off.
By activating the fan function, the envi-
ronment lighting function is activated
automatically
Hood lights cannot be regulated with a
dimmer!
Filter cleaning signal
When the filter cleaning signal (1)
flashed, it is necessary to clean the fil-
ter.
After the cleaning, reinstall the filter and
reset the cleaning signal key by press-
ing the "0" key for at least 3 seconds.
Symbol "1" will then stop flashing.
To reset the key, it is necessary that the
hood is in the OFF mode. The signal is
activated after max. 40 operating hours.
Activated carbon filter regenera-
tion symbol
When the activated carbon regeneration
filter symbol (2) flashes, the activated
carbon filter needs to be cleaned. After
the cleaning, reinstall the filter and reset
the activated carbon filter regeneration
key, by pressing keys 1 and 2 at the
same time, for at least 3 seconds: the
symbol will stop flashing and will be
reset, after a short beep. To reset the
key, the hood must be in the OFF
mode.
The signal is activated after max 160
operating hours.
en
17