Emission Levels; Intended Use; Technical Data; Machine Features - Festool MFK 700 EQ Manual De Instrucciones

Fresadora de cantos
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
– Harmful/toxic dust may be produced during
your work (e.g. paint containing lead, certain
types of wood and metal). Inhaling or coming
into contact with this dust may represent a haz-
ard for operating personnel or persons in the vi-
cinity. Comply with the safety regulations that
apply in your country.
Wear a P2 dust mask to protect your
health.
2.3

Emission levels

Levels determined in accordance with EN 60745 are
typically:
Sound pressure level
Noise level
Measuring uncertainty allow-
ance
CAUTION
Operating noise
Damage to hearing
Use ear protection!
Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Vibration emission level
(3 directions)
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during

operation.

– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3

Intended use

The edge router with router table for edging must
be used for its intended purpose, i.e. cutting edges
made from wood, plastic and similar materials.
The user is liable for improper or non-in-
tended use.
L
= 78 dB(A)
PA
L
= 89 dB(A)
WA
K = 3 dB
(vector sum for three
h
a
= 3,0 m/s
h
K = 2,0 m/s
4

Technical data

Edge router
Power
Speed (no load) n
Tool holder
Max. routing diameter
Weight (excluding cable)
Safety class
5

Machine features

Cutter stop
[1-1]
[1-2]
Locking for ball bearing brake
[1-3] +
Locking for routing depth
[1-7]
Plug it-connection
[1-4]
Routing depth setting
[1-5]
[1-6]
Handle, locking for routing depth
Speed control
[1-8]
On/Off switch
[1-9]
[1-10] Extractor connector
[1-11] Spindle lock
6
Operation
2
2
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.
In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
Always switch the machine off before con-
necting or disconnecting the mains power
cable!
Connecting and detaching the mains power cable -
see Fig. [2].
The switch [1-9] is an on/off switch (I = ON, 0 =
OFF).
MFK 700 EQ
MFK 700 EQ
10000-26000 rpm
0
(optional : 6 mm, 1/4")
WARNING
GB
720 W
8 mm
26 mm/ 1"
1,9 kg
/II
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mfk 700 eq/bMfk 700 eq/b-plus500299574453

Tabla de contenido