Emission Levels; Machine Features - Festool PDC 18/4 Li Manual De Instrucciones

– Check the plug and the cable regularly and should
either become damaged, in order to avoid a hazard,
have them replaced by an authorised after-sales
service workshop.
– Always pull the mains plug out of the socket when
the charger is not in use.
2.4

Emission levels

Levels determined in accordance with EN 60745 are
typically:
Drilling
Sound pressure level
Noise level
Uncertainty
Impact drilling
Sound pressure level
Noise level
Uncertainty
CAUTION
When working with noise
Damage to hearing

Always use ear protection.
Vibration emission value a
rections) and uncertainty K measured in accordance
with EN 60745:
Drilling in metal
Fastening
Impact drilling into concrete
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
L = 73 dB(A)
PA
L = 84 dB(A)
WA
K = 3 dB
L = 104 dB(A)
PA
L = 115 dB(A)
WA
K = 3 dB
(vector sum for three di-
h
a = 5,6 m/s
h
K = 1,5 m/s
a < 2,5 m/s
h
K = 1,5 m/s
a = 12,4 m/s
h
K = 3,0 m/s
3 Intended use
Cordless impact drills are suitable for
– drilling in metal, wood, plastic and similar materials,
– impact drilling into walls, concrete and similar
building materials,
– inserting and tightening screws
Charger TCL 3 suitable for
– charging Festool battery packs: BP, BPS and BPC
(NiMH, NiCd, li-ion are recognised automatically.)
– indoor use only.
The user is liable for improper or non-intended
use; this also includes continuous industrial
operation.
4 Technical data
Cordless impact driver
Motor voltage
Idling speed*
Torque for easy/tough fastening
applications
Adjustable torque**
2
2 Chuck clamping range
Drill diameter max.
2
2
Fastening in pine
2
Tool holder in drill spindle
2
Weight without battery pack with
Centrotec
* Speed specifications with fully charged battery
pack.
** The maximum speed is reduced in the lower torque
stages.

Further technical data on the charger and battery
packs can be found on page 5.
5

Machine features

[1-1] LED light switch
[1-2] LED lamp
[1-3] Bit store
PDC 18/4 Li
GB
PDC18/4 Li
18 V
1st gear 0 - 400 rpm
2nd gear 0 - 850 rpm
3rd gear 0 - 1850 rpm
4th gear 0 - 3800 rpm
40/60 Nm
1st gear 0,75 - 12 Nm
2nd gear 0,6 - 7,5 Nm
3rd gear 0,55 - 5 Nm
4th gear 0,5 - 2,7 Nm
1,5 - 13 mm
Wood 50 mm
Metal 12 mm
max. 
8 mm
1/4"
1,6 kg
13