Triton TA235CSL Instrucciones De Uso página 2

Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This
product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you
fully understand the instructions. Ensure all users of the tool read and fully understand this manual.
Specification
Model number:
Input voltage:
Input power:
No load speed:
Blade diameter:
Blade bore diameter:
Blade teeth:
Blade kerf:
Bevel adjustment:
Positive bevel stops:
Cutting capacity at 90°:
Cutting capacity at 45°:
Insulation:
Net weight:
Laser:
Wave length:
Output power:
Sound and vibration information:
Sound pressure L :
PA
Sound power L :
WA
Uncertainty K:
Weighted vibration a :
h
Uncertainty:
GB
2
Original Instructions
TA235CSL
EU - 220V - 240V AC, 50Hz, 10.5A
SA - 220V - 240V AC, 50Hz, 10.5A
AU - 220V - 240V AC, 50Hz, 10.5A
2300W / 3.08hp
4500min
-1
235mm / 9 1 ⁄ "
4
30mm / 1.1"
40 TCT
2.2 – 3.5 mm / 0.09 – 0.14"
0° to 45°
0°, 15°, 22.5°, 30° and 45°
82mm / 3.2"
58mm / 2.2"
7.7kg / 16.98lbs
Class 2
650nm
≤1mW
97,1dB(A)
108,1dB(A)
3dB
2,470m/s
2
1.5m/s 2
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
As part of our ongoing product development, specifications of Triton products may alter
without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.