Maytag 3LMVWC100YW1 Manual De Uso Y Cuidado página 12

Lavadora de carga superior
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING
If you experience
Washer not performing as expected (cont.)
Incorrect or wrong
Check for proper water
wash or rinse
supply.
temperatures
Energy-saving controlled
wash temperatures.
Load not rinsed
Check for proper water
supply.
Using too much detergent.
Washer not loaded
as recommended.
Using too low a load
size/water level selection.
Load is tangling
Washer not loaded as
recommended.
Not cleaning or
Washer not loaded as
removing stains
recommended.
Adding detergent on top of
load.
Using too low a load size/
water level selection.
Using too much detergent.
Not using correct cycle for
fabric type.
Not using dispensers.
Not washing like colors
together.
12
First try the solutions suggested here to possibly avoid a service call.
Possible Causes
Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached to both washer and faucet, and have both
hot and cold water flowing to inlet valve.
Check that inlet valve screens are not clogged.
Remove any kinks in hoses.
This washer uses cooler wash and rinse water temperatures than your
previous washer. This includes cooler hot and warm washes.
Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached and have water flowing to the inlet valve.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
The suds from too much detergent can keep washer from operating
correctly. Always measure detergent and follow detergent directions
based on load size and soil level.
The washer is less efficient at rinsing when load is tightly packed.
Load garments in loose heaps evenly around the basket wall.
Load with dry items only.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 additional garments after washer has started.
Choose a load size (water level) that matches the load being washed.
See "Using Your Washer" section.
Select a cycle with a slower wash action and spin speed; however, items
will be wetter than those using a higher speed spin. See the "Cycle Guide"
to match your load with the best cycle.
Load garments in loose heaps evenly around the basket wall.
Reduce tangling by mixing types of load items. Use the recommended
cycle for the type of garments being washed.
Washer is less efficient at cleaning when load is tightly packed.
Load garments in loose heaps evenly around the basket wall. Load with dry
items only.
Add only 1 or 2 additional garments after washer has started.
Add detergent, oxi products, and color-safe bleach to the bottom
of the basket before adding the load items. suds from regular
detergent can keep washer from operating correctly.
Choose a load size (water level) that matches the load being washed.
The suds from too much detergent can keep washer from operating
correctly. Always measure detergent and follow manufacturer's directions
based on load size and soil level.
Use a higher soil level cycle option and warmer wash temperature to
improve cleaning.
Use Heavy Duty-Heavy cycle for tough cleaning. See the "Cycle Guide" to
match your load with the best cycle.
Use dispensers to avoid chlorine bleach and fabric softener staining.
Load dispensers before starting a cycle.
Do not add products directly onto load.
Wash like colors together and remove promptly after the cycle is complete
to avoid dye transfer.
Solution

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido