VI - Maintenance
During maintenance and cleaning, handle the
vacuum cleaner in such a manner that there is no
danger for maintenance staff or other persons.
In the maintenance area use filtered compulsory
ventilation and wear protective clothing. Clean the
maintenance area in a way preventing harmful
substances to enter into the surroundings.
A dust test must be performed at least once a year
by SPARKY service or a trained person. This test
includes checking for a damaged filter, the sealing
of the vacuum cleaner and the proper functioning
of the control devices.
m-class vacuum cleaners only
During maintenance and cleaning ensure that
dust is not unnecessarily spread around.
We recommend wearing a P2 breathing mask
during maintenance and cleaning.
Before removing the vacuum cleaner from the
area contaminated with harmful substances clean
the outside of the vacuum cleaner, wipe it clean or
pack the vacuum cleaner in well sealed packaging
and avoid spreading deposited harmful dust.
During maintenance and repair all contaminated
parts which could not be cleaned satisfactorily
shall be packed in well sealed bags and disposed
of in a manner complying with the valid regula-
tions for such waste removal.
maintenance
schedule
Emptying the tank
Replacing the
fleece filter bag
Replacing the
disposal bag
Replacing the PET
cartridge filter
(VC 1530SP,
VCM 1530SP)
Replacing the flat
filter (VC 1530SA,
VCM 1530SA)
EmptyING tHE tANK
▪ Switch off and unplug the vacuum cleaner.
▪ Open the clamps and remove the upper sec-
tion.
▪ Take the tank out of the vacuum cleaner by the
handles.
▪ Tilt out the collected material.
▪ Clean the tank rib and seals before placing the
upper section. If the seal or groove is dirty or
damaged, the suction performance will be re-
10
EN
After completion
When
of work
necessary
●
VC 1530SP • VC 1530SA • VCM 1530SP • VCM 1530SA
duced.
▪ Attach the upper section back on the vacuum
cleaner.
▪ Close the clamps and ensure that they fit
properly.
▪ Before inserting the suction hose back clean
the inlet fitting and hose collar.
REplAcING tHE flEEcE fIltER bAG
(vc 1530sp, vcm 1530sp)
▪ Switch off and unplug the vacuum cleaner.
▪ Open the clamps and remove the upper sec-
tion.
Removing the fleece filter bag
– Remove the hard carton insert of the filter
bag from the inlet fitting carefully.
– Close the hard carton insert of the bag.
– Dispose of the filter bag in accordance with
legal regulations.
Inserting the fleece filter bag
– Clean the tank.
– Insert a new filter bag into the tank.
– Press the hard carton insert of the bag to the
inlet fitting carefully.
▪ Attach the upper section back on the vacuum
cleaner.
▪ Close the clamps and ensure that they fit prop-
erly.
REplAcING tHE DIsposAl bAG
(vc 1530sA, vcm 1530sA)
▪ Switch off and unplug the vacuum cleaner.
▪ Open the clamps and remove the upper sec-
tion.
●
Removing the disposal bag
●
– Tie the disposal bag with a cord.
– Remove the hard carton insert of the dispos-
●
al bag from the inlet fitting carefully.
– Close the hard carton insert of the bag.
– Dispose of the bag in accordance with legal
●
regulations.
Inserting the disposal bag
– Clean the tank.
– Insert a new disposal bag into the tank.
– Check that the disposal bag ventilation open-
ings v remain inside the tank.
– Press the hard carton insert of the bag firmly
to the inlet fitting.
– Fold the top edge of the disposal bag over
the tank rim.
▪ Attach the upper section back on the vacuum
cleaner.