Fakir IC 1025 Instrucciones De Uso página 15

after use
Cleaning the brush roller
Replacing the drive belt
To achieve a high efficiency of the electric suction brushes, you should regularly remove
hairs, fibres, threads, etc. from the brush rollers and if necessary from the drive belts.
Always switch the battery vacuum cleaner off before you start cleaning.
Remove the electric suction brush from the basic unit.
Remove hair, fibres, threads, etc. which have wound round the brush roller with a knife
or scissors. Thoroughly clean the brushes of the roller and the drive belt (brush off and /
or vacuum clean)
Note :
Before replacing the drive belt remove the belt cover by loosening the screw on the
bottom of the electric suction brush. Take care before screwing together that the new
drive belt is located correctly over the drive pinion of the motor.
15