Festool KB-KA 65 Manual De Instrucciones página 11

6 Additional roll ZR-KA 65
Intended use
Safe processing of thick and brittle veneered edges
due to large bending radius of the edge.
For affixing edging to tight curves and shaped
parts.
Offers additional pressure point for applying more
pressure on the edge of the board when glued.
7 Scraper ZK-HW 45/45
Intended use
Trimming overhanging material after the edge is
cut (plastic edging) without damaging the surface
of the workpiece.
Smoothing away impact marks left by cutters
during the routing process (R1, R1.5 and R2 mm
curves).
Breaking edges, affixing curve and cleaning thin
plastic edges and inclined edges/mitred edges (R1,
R1.5 and R2 mm curves).
Scraper rested on the attached cord for perfect
guidance.
Solid carbide for greater durability and resistance
to wear.
8 Plastic sliding plate LAS-STF-KA
65 with scratch protector EF-LAS-
STF-KA 65/3x
Intended use
For using the edge bander on delicate or high-gloss
surfaces.
With StickFix system for quick and easy replace-
ment of the felt layer.
9 Polishing felt PF-STF 80 x 133
STF-H/5x
Intended use
For polishing high-gloss edging in combination
with polish MPA 6000 and hand sanding block HSK
80 x 133.
10 Hand sanding block HSK 80x133 H
Intended use
Hand sanding block for mounting StickFix sanding
discs, sanding cloths and polishing felt in the di-
mensions 80 x 133 mm.
11 Polish MPA 600
Intended use
MPA 600 polish for polishing high-gloss edges with
the hand sanding block and polishing felt or a Fes-
tool polisher.
12 Hand abrasive Brilliant 2
Intended use
Suitable hand abrasive for hand sanding block Bril-
liant 2, grain size P 320, for smoothing cutting
marks on the edge.
13 Accessories
Always use accessories and consumable materials
approved by Festool. See Festool catalogue or
www.festool.com.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
Use only original Festool spare parts!
EKAT
4
Order No. at: www.festool.com/service
5
3
2
1
14 Environment
Do not dispose of the device together with domes-
tic waste! Dispose of machines, accessories and
packaging at an environmentally responsible recy-
cling centre. Observe the valid national regulations.
Information on REACh: www.festool.com/reach
KB-KA 65
GB
11