Makita BBC231U Manual De Instrucciones página 8

Noise
Model
BBC231U/BC231UD
BBC300L/BC300LD
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear
ear protection.
Vibration
Model
BBC231U/BC231UD
BBC300L/BC300LD
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
................. Take particular care and attention.
....... Read instruction manual.
................ Danger; be aware of thrown objects.
................ The distance between the tool and
bystanders must be at least 15 m.
.......... Keep bystanders away.
....... Keep distance at least 15 m.
............... Avoid kickback.
................ Wear a helmet, goggles and ear
protection.
................. Wear protective gloves.
................ Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
................ Do not expose to moisture.
............ Top permissible tool speed.
8
Sound pressure level average
L (dB (A))
PA
79.7
79.3
Left hand
Uncertainty K
2
a (m/s )
h
(m/s
2.5 1.5
2.5 1.5
ENG901-1
END008-4
Uncertainty K (dB (A))
Right hand
2
a (m/s )
2 h
)
2.5
2.5
Cd
.......... Only for EU countries
Ni-MH
Li-ion
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Brushcutter
Model No./ Type: BBC231U, BC231UD
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN/ISO11806, EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
2.5
2.5
Uncertainty K
2
(m/s )
1.5 ISO22867, EN786
1.5
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Applicable
standard
ISO22868
EN786
Applicable
standard
EN786
ENH035-4