Dometic S5 Instrucciones De Montaje Y De Uso página 6

Install S5
Supplement to fig. 5 B: Wall thickness of 27 – 42 mm
I
NOTE
For a wall thickness of 27 – 42 mm, use the 3.9 x 25 mm fastening
screws included in the delivery contents.
➤ Cut the inner frame according to the following table:
Wall thickness
27 – 28 mm
29 – 30 mm
31 – 32 mm
33 – 34 mm
Supplement to fig. 5 C: Wall thickness of 43 – 53 mm
I
NOTE
For a wall thickness of 43 – 53 mm you will need mounting screws
3.9 x 32 mm (not included in the scope of delivery).
➤ Cut the inner frame by 16 mm.
➤ Glue a base to the outer frame according to the following table:
Wall thickness
43 – 44 mm
45 – 46 mm
47 – 48 mm
I
NOTE
You can use bases out of wood, plastic or aluminum. The edge of the
base should be 11 mm wide.
See fig. 6
➤ Clean the wall section in the installation area.
6
Trim X
2 mm
4 mm
6 mm
8 mm
Height of the
base
2 mm
4 mm
6 mm
Wall thickness
35 – 36 mm
37 – 38 mm
39 – 40 mm
41 – 42 mm
Wall thickness
49 – 50 mm
51 – 52 mm
53 mm
S5
Trim X
10 mm
12 mm
14 mm
16 mm
Height of the
base
8 mm
10 mm
12 mm
EN