S5
2
Safety and installation instructions
Please observe the prescribed safety instructions and stipulations from the
vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
• Damage to the product resulting from mechanical influences
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
I
NOTE
If you do not have sufficient technical knowledge for installing the com-
ponents in vehicles, you should have a specialist install the wall window
in your vehicle.
Please note the following:
• Seek out a specialist workshop immediately if errors or malfunctions occur.
• Before starting your journey, check that the wall window is locked properly.
• Before starting your journey, check the wall window for damage (such as tension
cracks in the acrylic glass).
• Do not open the wall window during strong wind or rain.
• Close the wall window if it rains or snows.
• Do not leave the vehicle with the wall window open.
!
WARNING!
Always keep the vent window closed while driving and while on public
roads.
3
Scope of delivery
No. in
Quantity Description
fig. 1
1
1
2
1
3
22
4
4
EN
Outer frame
Inner frame
Mounting screw 3.9 x 25 mm
Ventilation grille
Safety and installation instructions
3