Intended Use; Instructions Before Installation - Dometic S5 Instrucciones De Montaje Y De Uso

Intended use

4 Intended use
The S5 wall window is suitable for installation in a van or RV. It is designed as a vent
window or sliding window. Integrated into the interior frame are a blackout blind
and fly screen.
5

Instructions before installation

➤ Before installation, check the wall thickness of your vehicle. Consult the vehicle
manufacturer if you have any questions.
➤ When choosing the installation location, observe the following:
– Adjoining components (attachment and reinforcing parts), cables and cabi-
nets in the vehicle interior must not get damaged when sawing the hole.
– Sufficient space needs to be available for installing the inner and outer frames.
– Only install the wall window on flat wall surfaces.
– When installing the sliding window, keep in mind that the movable window
pane is at the front in the direction of travel when closed.
5.1 Cut out
See fig. 2
5.2 Using reinforcing rails
Supplement to fig. 3
➤ Before installation, check whether the wall hole needs reinforcing.
➤ Remove the filling/insulation according to the width of the reinforcing rails (not
included in the scope of delivery) (A).
➤ Fit the reinforcing rails (B).
4
S5
EN