Getting Started - Midland H3+ Manual De Usuario

GETTING STARTED

To power ON: press the Power/Mode button.
To power OFF: press and hold the Power/Mode button.
SETTINGS
1. To enter the Settings menu, press the Power/Mode button for 3 times.
2. Use the UP/DOWN controls to browse the settings.
3. To select a function and change its setting, press the Shutter/Select control and then UP
or DOWN to choose the desired option.
4. Press Shutter/Select to confirm your selection.
5. To exit the Setting menu, press the Power/Mode button (if you exit the menu without giv-
ing a confirmation, H3+ will keep the latest option selected).
MENU
› Resolution: 1920x1080 (FHD), 1440x1080 (HD), 1280x720 (HD Ready) 848X480
WVGA and 640x480 (VGA).
› Exposure: allows to adjust the exposure
› Motion detection:
recording as soon as a movement is detected.
› Looping video-Cyclic record:
full, it overwrites the older videos. Videos will be split in different files with a pre-set dura-
tion.
› Video lapse: H3+
› WDR (High quality ): this feature improves the video definition. It improves the overall ex-
posure throughout the entire image. It enables the camera to pick up greater detail in dark
shadows and makes sure the highlights won't get
› Record Audio: activates/deactivates the microphone (the audio recording).
› Date stamp: Date and time on videos.
› Image size: 16/12/10/8/5/3/2/1.3 MP/VGA.
› Quality: set the desired level.
› Capture mode:
› Burst (Continuous shooting):
seconds).
› Sharpness: adjusts the contrast of the photo.
› ISO: regulates the light sensitivity 100/200/auto.
› Anti-shaking: image stabilizer.
› White Balance:
Fluorescent
› Frequency: adjusts video frequency 50Hz/60Hz.
› OSD mode: allows to visualize the display information.
› Screen saver: sets the automatic turning off of the display (off/ 1 minute/2 minutes /3
minutes).
if this feature is enabled and the camera is on, it automatically starts
the camera records continuously and when the memory is
takes a photo at pre-set time intervals, creating a single video.
sets the delay time for the self timer.
the camera takes
adjusts the sensitivity to white color:
between -2.0 and +2.0.
blown-out.
photos at pre-set time intervals
Auto, Daylight,
12
(3/10
Cloudy, Tungsten,