Dismantling The Machine; Demolishing The Machine; Disposing Of Harmful Substances . Pag. Gb - OEM PRESSFORM 350 Manual De Uso

Chapter 7

7.1 - DISMANTLING THE MACHINE

Proceed by complying with the instructions given in the
"Installation" chapter, w orking in re verse order, if the
machine must be dismantled and then mo ved to another
site.
DANGER
Before disassembling the mac hine or demounting
some machine components, disconnect the power
supply.
The machine assembling shall onl y be carried out
by skilled and authorized personnel.
ATTENTION
In case it is necessary to disassemble the machine
or demount some mac hine components in a diff e rent
way in comparison with the written instructions,
Company man ufacturer or its Ag ent shall be
contacted - see addresses on the third page of this
publication.

7.2 - DEMOLISHING THE MACHINE

To protect the en vironment, please
proceed in compliance with the local
laws in force.
When the machine can no longer be
used or repaired, please proceed with
recycle and disposal.
Electrical equipment cannot be disposed of as
ordinary urban w aste: it m ust be disposed of
according to the special EU directiv e for the recycling
of electric and electronic equipment.
Electrical equipment is marked with a pictogram of a
garbage can inside a barred circle .This symbol means
that the equipment w as sold on the mar ket after
August 13, 2005, and must be disposed of
accordingly.
Due to the substances and mater ials it contains ,
inappropriate or illegal disposal of this equipment, or
improper use of the same , can be harmful to humans
and the en vironment. Improper disposal of electr ic
equipment that fails to respect the la ws in force will
be subject to administr ative fines and penal sanctions .
GB - 24
Dismantling - Demolition - Disposal
ATTENTION
Consult the ne xt para graph when disposing of
harmful materials (lubricants, solvents, coating
products, etc.).
7.3 - DISPOSING OF HARMFUL SUBSTANCES
Consult the provisions established by the Standards in
force in each individual countr y before disposing of such
substances.
ATTENTION
Any improper use b y the Customer bef ore, during
or after scrapping and disposing of the parts of the
machine, in respect of the construction and
application of the applicab le regulations, shall be
the customer's responsibility.
PIZZAFORM