Installation Position - RK Rose+Krieger LZ 70 P Instrucciones De Montaje

7. Life Phases
•
You should only use the screws supplied when using/fitting a swivel
flange or pin.
•
Screws that are too long will be destroyed when mounting the cover cap
or gear cover.
•
You should ensure that the heads correctly counter the nuts included in
delivery if using/fitting a joint or fork head.

Installation position

F
1
Draw bar
load
F
There must be no lateral forces on the push rod!
60
F
=
2
Draw bar
load
Maximum torque on the push
<
rod 2 Nm