Tightening Torque (Screws Din En Iso 4762); Commissioning; Normal Operation - RK Rose+Krieger LZ 70 P Instrucciones De Montaje

7.5 Tightening torque (screws DIN EN ISO 4762)

Dimensions
M4
M5
M6
M8
M10

7.6 Commissioning

Only persons who have read and understood these assembly instructions completely may put the
unit into service.
The mode of function of this electric cylinder results in forces that can lead to personal injury or
property damage.
The safety provisions of the electric cylinder must therefore be observed.

7.7 Normal operation

During operation, check the electric cylinder regularly to ensure it properly functions.
During normal operation, look out for obvious changes in the incomplete machine. If defects oc-
cur, the electric cylinder must be taken out of use immediately to prevent damage.
As a part of the complete machine assembly, the assembly instructions of the whole machine ap-
plies in accordance with the Machinery Directive 2006/42/EC.
Strength 8.8
Tightening torque
M (Nm)
A
3.0
5.9
10
25
49
Strength 10.9
Tightening torque
M (Nm)
A
4.4
8.7
15
35
72
7. Life Phases
Strength 12.9
Tightening torque
M (Nm)
A
5.1
10
15
43
84
61