Recommended Lubricants - RK Rose+Krieger LZ 70 P Instrucciones De Montaje

Recommended lubricants

Recommended lubrication for the fastening bolts in the fork head and for the push
rod of the LZ70: mineral oil based greases of KP1K-30, DIN 51502 quality
Recommended lubrication for ball threaded spindles: mineral oil based greases of
NLGI class 2 (Dynalub 510) quality.
Recommended lubrication for trapezoidal threaded spindles: Molykote EM-50L or
Klüber GLY801
Lubrication intervals and lubricant amounts:
Use
trapezoidal threaded
spindles
ball threaded spindles
push rod
fastenings /
bolts in fork head
All work with the electric cylinder may only be carried out in accordance with these instructions.
The device may only be opened by authorized specialist personnel. If there is a fault with the
drive, we recommend that you contact the manufacturer or send the drive for repair.
•
When working on the electrics or the electrical elements, they must be first disconnected from
the supply to prevent any risk of injury.
•
Unauthorised modifications or changes to the working unit are not permitted for safety rea-
sons.
•
Safety-related equipment must be checked on a regular basis, however, at least once a year
for completeness and function.
•
For maintenance, the push rod should be positioned as shown in the diagram on page 50.
Funnel-shaped grease nipple for
push rod lubrication
push rod
Lubrication intervals
every 200 operating
hours
every 400 operating
hours
every 800 operating
hours
every 800 operating
hours
Threaded plug for
spindle lubrication
Lubricant amount
3
2 cm
3
2 cm
3
1 cm
3
1 cm
Lubrication hole for
7. Life Phases
spindle
63