Corner Mounted - Comelit MPTZ37IR Manual Del Usuario

b. As shown in fig 3, attach the wall hanging bracket to the wall with wire and cable passed
through it.
Fig 3

2.3.2 Corner Mounted

Fig 11
Installation conditions:
Corner mounted dome can be used in the hard wall structure with an angle of 90° whose
thickness should be enough to install expansion bolt in indoor and outdoor environment. The
wall can bear at least 4 times the weight of the dome. Install corner mounted attachment and
wall hanging bracket:
a. As shown in fig 12, with the installation holes in the corner mounted attachment as pattern,
draw punched locations on the wall with an angle of 90°and punch to install expansion bolt.
13