Language; Reset - Comelit MPTZ37IR Manual Del Usuario

<SCHEDULE>
START END
00:00:00 00:00:00
00:00:00 00:00:00
00:00:00 00:00:00
00:00:00 00:00:00
00:00:00 00:00:00
00:00:00 00:00:00
00:00:00 00:00:00
00:00:00 00:00:00
SAVE
Remark: When the schedule is set, there cannot be any overlap in the time periods. The system
will respond with priority to the first triggered schedule, only after which is completed, it will
respond other schedules. Please make sure there is only one schedule at each specific period.
System will return to preset 1 after completing the schedule.

4.7 Language

<LANGUAGE>
LANGUAGE
EXIT

4.8 Reset

<RESET>
CAM DATA
SYS DATA
FACTORY DEFAULT
CALIBRATION
EXIT
All the information in memory will be deleted, such as presets, patterns, etc. Please use this
carefully. This operation will take a minute or more to finish. Please wait patiently.
 CALIBRATION: Execute this function to make the motor of the dome to reset in a fixed time
to prevent locate inaccurately caused by external operation. Default set is OFF, the function
has 1-59 days and OFF selectable.
27
Example of Schedule:
1: 8 scheduled events can be set. First, select the schedule
to set and press the 'right' key to enter the edit screen.
ACT
NONE
2: Use the up and down keys to adjust the present value, and
NONE
press the right key to enter and move to the next adjustment.
NONE
The item being changed will blink. When it blinks, operate the
NONE
right key again to exit the editing the schedule.
NONE
NONE
3: Select the next schedule and repeat the operations above.
NONE
4: When setting the status, press the left key to exit setting.
NONE
When selecting the status, press left key to return to the
previous page.

Germany, Italian, Polish and Portuguese, Russian etc.
selectable.
ENGLISH
 CAM DATA: This is used to initialize the camera back to
the factory default settings This applies to the camera
module only, not to presets, tours etc..
 SYS DATA: This is used to initialize the system settings,
including the camera settings, but it will not delete all the
OFF
information in memory.
 FACTORY DEFAULT: This is used to initialize all of the
settings of the system and camera.
LANGUAGE: Language has English, Spanish, French,