General Specifications - Minipa MFA-845 Manual De Instrucciones

3. Measure first a covered conductor of 75VAC or more, to confirm
if each LED light up.
4. The presence of live wires and phase sequence are verified by
LED indication and Buzzer as soon as complete detection.
5. The LEDs R, S, T always light up while the instrument is detec-
tion the live phase.
6. CW LED ON = Correct sequence phase
CCW = Incorrect
7. 30mm is the maximum diameter of the cable to be tested.

6) GENERAL SPECIFICATIONS

• Voltage: 75V~1000V AC
• Frequency Response: 45 / 65Hz
• Auto power OFF: After 5 minutes without use.
• Safety Compliance: EN 61010-1 CAT III 1000V ou CAT IV 600V
EN 61326-1
• Low Battery Indication: The LED flashes in 7.0±0.2V or less
• Alligator Clips: 0.8 meters each clip, Red (R), White (S) and
Blue (T).
• Operation Environment: -10°C to 50°C, RH <80%
• Storage Environment: -20°C a 60°C, RH <80%
• Dimensions: 128(H) x 72(W) x 46(D)mm
• Weight: Approx. 375g with battery
15