Optika Italy B-150D Manual De Instrucciones página 9

5.0 USING THE CAMERA
It may happen sometimes that Windows doesn't recognize a Camera using one of your PC USB
ports, while gives no problem using another port.
3.0 HOW TO TEST YOUR CAMERA
In order to check if your Camera works correctly, it's not necessary to put it into the microscope: it's
enough to connect it into the USB port, run Vision Lite using the icon on your desktop, select the right
driver and check whether the shown image is not totally black.
4.0 SELECT THE RIGHT DRIVERS
It's very easy :
For B-150DM Monocular :
NOVEL-H1C
For B-150DB Binocular :
CAMERA -X3
To use Optika Vision Lite you have to tell the Software which is the Driver by selecting the microsco-
pe-shaped icon.
5.0 GETTING STARTED WITH OPTIKA VISION LITE, A VERY EASY
MEASURING AND DOCUMENTATION SOFTWARE
Run Optika Vision Lite by clicking on its icon on your desktop.
Select the right Driver for capturing the image. Note that after choosing the driver and before capturing
the image you can set the brightness, saturation, gamma ecc..
Then you can capture the image.
The image is now ready for being manipulated using Optika Vision Lite.
Page 9