Modbus/Tcp - schmersal SD-I-U Serie Manual De Instrucciones

Manual de instrucciones
Gateway UNIVERSAL para el diagnóstico de serie
Descripción de los módulos de bus de campo
Front View
10.7

Modbus/TCP

# Item
1 Network Status LED
2 Module Status LED
3 Link/Activity
4 Ethernet Interface
Network Status LED
Note: A test sequence is performed on this LED during startup.
LED State
Off
Green
Green, flashing
Red
Red, flashing
Module Status LED
Note: A test sequence is performed on this LED during startup.
LED State
Off
Green
Red
Red, flashing
LINK/Activity LED
LED State
Off
Green
Green, flickering
Ethernet Interface
The ethernet interface supports 10/100Mbit, full or half duplex operation.
1
Description
No power or no IP address
Module is in Process Active or Idle state
Waiting for connections
Duplicate IP address, or FATAL event
Process Active Timeout.
Description
No power
Normal operation
Major fault; module is in state EXCEPTION (or FATAL event)
Minor fault; the present IP settings differs from the settings in the net.cfg.ob
Description
No link, no activity
Link established
Activity
ES
About the Anybus-CompactCom Modbus/TCP 1-2
1 8
2
4
3
SD-I-U-...
15