Programming The Robot - ECOVACS ROBOTICS DEEBOT M82 Manual De Instrucciones

3.4 Programming the Robot

DM82 has a Time Scheduling function. DM82 can be programmed to automatically clean
once per day, at a specific time even if nobody is at home. The current time of day and the
cleaning time are scheduled using the Remote Control.
* All scheduled cleanings are performed in AUTO Cleaning Mode.
*
If not, press the AUTO Mode Button on the robot or the START/PAUSE Button on the Remote
Control to wake up the robot.
* When programming the robot with the Remote Control, point the Remote Control towards the
robot. Every scheduling step using the Remote Control triggers a beep from the robot as a
response. The step is invalid without an emitted beep.
1 Set the Current Time of Day
Press the Set Current Time Button on the
Remote Control. The "hour" in the second line on
3. Operating and Programming
Press the up Direction Control Button and
the MAX Button to adjust "hour" and "minute"
number. Press the left and right Direction Control
Buttons to switch between hour and minute.
Press the Set Current Time Button on the
Remote Control to confirm and save the
current time of day.
13
EN