Cleaning Mode Selection; Programming The Robot; Additional Settings - ECOVACS ROBOTICS DEEBOT OZMO 930 Manual De Instrucciones

* For models with app-connectivity, various functions can be performed using the ECOVACS
App.

3.3 Cleaning Mode Selection

DEEBOT has several Cleaning Modes to choose from to effectively clean different floors. Cleaning
Modes are selected using the ECOVACS App.
1 AUTO Cleaning Mode
This is the most commonly used mode. In
AUTO Cleaning Mode, DEEBOT cleans in a
back and forth straight-line pattern.
2 Spot Cleaning Mode
This mode is applicable for areas of highly concentrated dirt or dust. In Spot Cleaning Mode,
DEEBOT focuses on selected areas to clean. Specific areas on the map can be selected to be
cleaned with Spot Cleaning Mode using ECOVACS App.
3 Area Cleaning Mode
After DEEBOT has scanned and mapped the environment, specific areas on the map can be
selected to be cleaned with Area Cleaning Mode using ECOVACS App.

3.4 Programming the Robot

Time Scheduling
DEEBOT can be programmed weekly to clean multiple times per day at specific times using the
ECOVACS App.

3.5 Additional Settings

Virtual Boundary
A Virtual Boundary blocks DEEBOT from cleaning a specified area. The virtual boundary can be set
using ECOVACS App.
Continued Cleaning Function
When Continued Cleaning function is turned on, once DEEBOT is fully recharged, it automatically
returns to and continues to clean the uncleaned area not completed during the last cleaning task.
3. Operating and Programming
15
EN