EN
INSTRUCTIONS
13
refittinG tHe 5-Point
Harness sYsteM and coVer
a. after washing, place the cover
on the shell.
B. lnsert connecting pieces with
shoulder strap and buckle back
to the lower pa rt of seat.
c. Make sure the buckle is
connected safety, then cover
two shoulder pads on the
shoulder strap and pass through
strap holes.
d. also put the end of the
harness strap through the
harness strap slot and shell,
fix into the strap yoke, make
sure the seat straps can not be
twisted.
e. close the buckle, then fasten
the cover ali around. check that
it works!