JVC KD-AVX20 Manual De Instrucciones página 48

Menu items
D. Audio Output
Down Mix
D. (Dynamic) Range Compres.
(Compression)
AF Regional
TA Volume
Program Search
IF Band Width
3
DAB AF*
4
AV Input*
Selectable settings, [reference page]
Select the signal format emitted through the DIGITAL OUT (optical)
terminal. (☞ also page 58)
PCM Only: Select this when connecting an amplifier or a decoder
incompatible with Dolby Digital or MPEG Audio, or when connecting to a
recording device.
Dolby Digital: Select this when connecting an amplifier or a decoder
compatible with Dolby Digital.
Stream: Select this when connecting an amplifier or a decoder
compatible with Dolby Digital or MPEG Audio.
When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT (REAR) terminals.
Dolby Surround: Select this to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby Surround.
Stereo: Normally select this.
You can enjoy a powerful sound at a low volume level while playing
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On: Select to always use this function.
When the received signals from the current station become weak...
Off: Cancels—not selectable when <DAB AF> is set to <On>.
AF Regional: Switches to another station broadcasting the same
programme. The AF REG indicator lights up.
AF: Switches to another station. The programme may differ from the
one currently received (AF indicator lights up), ☞ [17].
, Initial 15, ☞ [16].
2
00 to 30 or 50*
Off, On, ☞ [17]
Auto: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide: Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
Off, On, ☞ [40]
You can determine the use of LINE IN and VIDEO IN plugs.
Off: Select when no component is connected ("AV Input" is skipped
while selecting the source).
iPod (Off): Select when connecting the iPod/iPhone using the USB Audio
and Video cable for iPod/iPhone. ☞ [33]
Audio&Video: Select when connecting an AV component such as a VCR.
Audio: Select when connecting an audio component such as a portable
audio player.
5
Camera* : Select when connecting the rear view camera.
Navigation: Select when connecting a Navigation System. ☞ [41]
48