Component Identmfication And Specification; General Description; Power Supply - gefran SM32 Manual De Instrucciones

2. COMPONENT IDENTMFICATION AND SPECIFICATION

2.1. GENERAL DESCRIPTION

SM-32 is a half-controlled three phase AC/DC converter for supplying DC link voltage to
a series of AC Drives, with C and D terminals parallel connected.
The precharge of the drive capacitors (time setting set via dip-switches) is done by
partializing the mains voltage via a thyristors bridge. A diagnostic circuit allows detection
of a mains power supply dip for system use.
N !
The direct parallel connection of the outputs (U2,V2,W2 terminals) of
OTE
two or more inverters is not possible !

2.2. POWER SUPPLY

SM-32 converter can be connected to the three phase power supply having the following
characteristics:
400V-15%
50 or 60 Hz
The maximum input power of the internal switching power supply is 100W, and the supplied
voltages are:
+/-15V 500mA
+24 V 2A
32-GB
up to 480+10%
(Dip-switch selectable)
Control card
Fan power supply (if present) and auxiliary
functions (regulator terminals power supply)
—————— SM 32 ——————