Ac Mains Choke; Converter Size Selection; Output Rated Currents For The Two Functioning Classes - gefran SM32 Manual De Instrucciones

2.5.4. AC Mains Choke

Converter Main
frequency
[Hz]
SM32-480-185 50/60
SM32-480-280 50/60
SM32-480-420 50/60
SM32-480-650 50/60
SM32-480-1050 50/60
SM32-480-1500 50/60
SM32-480-2000 50/60
N !
The use of AC mains choke on the power supply input is MANDATORY
OTE

2.6. CONVERTER SIZE SELECTION

Within the specified voltage field, the SM-32 converter supplies the same rated direct
current independently of the voltage itself. The increase of the output voltage causes an
increasing in the transferred power, whereas inverters are devices with a typically constant
transferred power (the supplied current decreases with the increasing of the output voltage).
As for the choice, therefore, the calculation is based on a common unit, the direct current
of the intermediate circuit, which, as for the inverters, is not mentioned into the product
instruction manual and has therefore to be calculated. Furthermore, the confrontation
between the two foreseen functioning classes has to be homogeneous (IEC 146 class 1 and
2).

2.6.1. Output Rated Currents for the Two Functioning Classes

Converter
SM32-480-185
SM32-480-280
SM32-480-420
SM32-480-650
SM32-480-1050
SM32-480-1500
SM32-480-2000
* Continuous service
** Service with overload possibility of 150% for 60 seconds
—————— INSTRUCTION MANUAL——————
Main three-phase inductance
Rated inductance Rated AC
[mH] current [A]
0.148
0.085
0.085
0.06
0.03
0.019
0.016
DC link current (Terminals C / D)
IEC 146 Class 1 *
185 A
280 A
420 A
650 A
1050 A
1500 A
2000 A
Saturation
current [A]
173 350
297 600
297 600
550 1050
869 1303
1425 2138
1712 2568
Type
LR3 - 090
LR3 - 160
LR3 - 315
LR3 869-1303-0,03
LR3 1425-2138-0,019
LR3 1425-2138-0,019
LR3-1712-2568-0,016
IEC 146 Class 2 **
150 A
225 A
340 A
540 A
850 A
1300 A
1500 A
35-GB