Eu - Declaration Of Conformity; Lawn Mower, Manually Operated And Mains-Powered (Stihl Rme); Technical Specifications - Stihl RME 443 Manual De Instrucciones

The fastening elements for the
mowing blade (e.g. blade fastening
screw) must be replaced when
replacing the blade, i.e. when
installing the blade. Spare parts are
available from a STIHL specialist
dealer.
17. EU - Declaration of
conformity
17.1 Lawn mower, manually operated
and mains-powered (STIHL RME)
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
the machine
Lawn mower, manually operated and
mains-powered (STIHL RME)
manufacturer's STIHL
brand:
type: RME 443.0
RME 443.0 C
serial number 6338
conforms to the following EC directives:
2000/14/EC, 2011/65/EU, 2014/30/EU,
2006/42/EC
The products have been developed in
compliance with the following standards:
EN 60335-1, EN 60335-2-77, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3
The versions of the standards valid on the
production date apply to development and
production of the products.
0478 121 9921 A - EN
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Sven Zimmermann
STIHL Tirol GmbH
The year of manufacture and machine
number appear on the rating plate of the
machine.
Measured sound power level:
94.0 dB(A)
Guaranteed sound power level:
96 dB(A)
Langkampfen,
2020-01-02 (YYYY-MM-DD)
STIHL Tirol GmbH
p.p.
Matthias Fleischer, Research and
Development Division Manager
p.p.
Sven Zimmermann, Quality Division
Manager

18. Technical specifications

RME 443.0 / RME 443.0 C:
Serial number 6338
Motor, design: Electric motor
type: Universal AC
electric motor
Voltage: 230 V~
Power input: 1500 W
Frequency: 50 Hz
Fuse: 7 A
Protection class: II
Type of protection: IPX 4
Cutting utilities: Cutter bars
Cutting width: 41 cm
Speed of cutting
utilities: 2,900 rpm
Cutter bar drive: Permanent
Tightening torque for
blade fastening
screw: 10 - 15 Nm
Wheel diameter
(front): 180 mm
Wheel diameter
(rear): 200 mm
Grass catcher box: 55 l
Cutting height: 25 - 75 mm
RME 443.0:
In accordance with Directive 2000/14/EC:
Guaranteed sound
power level L 96 dB(A)
WAd
47